cadgent·field notesCompare V4 ↗

KEEL-01 / OPTION 3 END PORTALS 27 SEP 2026

Flat floor.
Two end portals.

A new four-part study removes the two lengthwise bottom rails. Short-end frames bear a continuous basket floor; screws enter from outside the towers and meet nuts inside the end walls. Orbit the actual source geometry below.

First article dispatchedH2C finishedPhysical review pending
04printed parts modeled
39/39nominal geometry checks
461 gsolid PLA equivalent · assumed

01 / EXPLORE

The Option 3 assembly

Drag to orbit, scroll or pinch to zoom. Explode lifts the basket and top while moving each end portal outward. Ghost reveals the floor shelves and screw locations.

Source-derived three-quarter view of the KEEL-01 Option 3 basket resting between two end portals under the integrated top grip.
Actual Option 3 meshes · geometry study only

Keyboard: focus the 3D view, use arrow keys to pan, Shift + arrows to orbit, + or − to zoom, and 0 to reset. The buttons above work by keyboard too.

Continuous-floor basketTwo end portalsIntegrated top

02 / LOAD PATH

Short sills stay.

Each end portal joins two towers with a low transverse sill. A shelf on that sill reaches under the basket end, so the screws are intended to clamp and retain the basket while the shelves bear downward load. The long floor slots, rails and elastic eyelets are absent. The integrated top is the same mesh as V4.

Open the V4 rail-based viewer ↗

Exploded source render separating the continuous-floor basket, left and right end portals, and integrated top.
Source-derived assembly separation. Open for detail.

04 / EVIDENCE & FILES

A first article in progress.

The 39 passing modeled checks cover connected bodies, nominal collision and insertion samples, floor continuity, screw passages, shelf bearing and print-pose bounding boxes. The 461 g figure is solid-volume arithmetic at assumed density, not slicer consumption.

Form
Daniel authorized this geometry for a first-article print; final form acceptance is open.
Print
The H2C reported FINISH and the A1 mini basket was still running at the 27 September evening monitor snapshot. Cooled-part condition is unverified.
Open
Floor flex, end-wall peel, shelf bending, fastener fit and asymmetric carry.

Source-derived geometry

Basket STL ↓Left end portal STL ↓Right end portal STL ↓Integrated top STL ↓Geometry identity JSON ↗

These are geometry exports for inspection. The final native sliced packages were not retained; effective print settings and physical quality remain unverified.