cadgent·field notesRH-01 design page ↗

RH-01 / HALLWAY REMOTE HOLSTER 14 OCT 2026

Quieter.
Not fancier.

v0.3 settled function on the wall: it covers the old switch plate, catches both nubs and keeps the lower nub off the remote. This note is the form pass that followed: what the repo's form rules allow, the six moves Daniel agreed, three finishes to choose from, and the v0.4 CAD built from them.

v0.4 modelledv0.3 fitted: much betterNot printed yet
03concept directions
06agreed form moves
04geometry gates passing on v0.4

01 / v0.4

The v0.4 holster, as modelled.

All six moves plus a 2 mm seat correction from the v0.3 fit. Drag to orbit, scroll or pinch to zoom. Ghost shows the nub cavities hidden behind the closed front.

Blender render of the v0.4 holster from the front: a plain rounded slab with a pocket at the bottom whose side walls are cut at 45 degrees.
Actual v0.4 mesh · 68.4 × 119 × 25.5 mm

Keyboard: focus the 3D view, use arrow keys to pan, Shift + arrows to orbit, + or − to zoom, and 0 to reset.

05 / EVIDENCE & NEXT

Function first, then form.

The repo resolves safety, then function, then interfaces, then form. v0.3 settled function on the wall. v0.4 carries the form pass and the fit correction, and has not been printed.

v0.3
Printed on the H2C and fitted 14 October 2026: "much better fit". It sat 2 mm low, which v0.4 corrects.
v0.4
Sealed CLEAN with four geometry gates: both keyholes, an 8 mm cavity-roof bridge, a closed front skin, the pocket and the scoop. Print, fit and form call are open.
Concepts
Three Codex image generations from one prompt, stored with the design. Visual intent only; no number comes from them.
Open
Daniel's choice of A, B or C, the v0.4 print with a scarf seam checked in the slice, and the form verdict.

Files

v0.4 holster STL ↓v0.3 true-scale views PNG ↗v0.2 on the wall JPG ↗

The STL is the sealed v0.4 export from the design folder. The true-scale views are from v0.3.