KEEL-01 / INTEGRATED TOP V4 27 SEP 2026
Four parts.
One continuous grip.
A two-compartment utility caddy whose separate side frames carry into a single integrated top. Explore the actual V4 geometry and the source-derived review views.
New study: Explore Option 3 with a continuous floor and two end portals ↗ V4 remains the approved-form comparison.
01 / EXPLORE
The V4 assembly
These meshes are posed from the V4 source. Drag to orbit, scroll or pinch to zoom. Explode separates the parts along the modeled assembly path.
Actual V4 meshes · visual evidence only
Keyboard: focus the 3D view, use arrow keys to pan, Shift + arrows to orbit, + or − to zoom, and 0 to reset. The buttons above work by keyboard too.
02 / ASSEMBLY
A vertical sequence.
The two side U frames sit outside the closed basket ends. The basket lowers onto the full-length rail seats. The one-piece top then lowers over four tower tips. Generic fastener envelopes are modeled, but the exact hardware and physical fit remain open.

03 / INSPECT
Every piece, both poses.
The gallery shows V4 source renders. The four downloadable STLs below are print-pose geometry; the interactive assembly uses separately posed meshes derived from the same source.
04 / PRINT PLAN
How long might it take?
Check-only H2C slices of each part, not the selected two-printer jobs. Final duration changes with the A1 mini profile, filament, combined H2C plate and printer startup.
Serial reference total: about 9h 52m. Planned parallel route: basket on A1 mini; one side frame plus top on H2C, then the second frame after that bed is clear. The H2C reference work totals about 5h 02m, plus bed change. The A1 mini time and the combined H2C plate time still need final native slices.
05 / EVIDENCE & FILES
What this proves.
The approved V4 form and modeled checks support a reviewable digital candidate. The page does not establish successful printing, fit, hardware selection, load capacity or comfortable carry.
- Modeled
- V4 geometry, mass and cargo gates passed; source-derived renders and meshes are retained.
- Printed
- No V4 print completion or cooled-part inspection is recorded here.
- Open
- Rail retention, upper and lower hardware, basket seating, asymmetric carry and sway.
Print-pose meshes
Basket STL ↓Side U, plus STL ↓Side U, minus STL ↓Integrated top STL ↓Geometry identity JSON ↗Verified, sliced 3MF print jobs will follow the filament choice and final printer checks.





